Anemometer

Full Description

NOTE!! This item is located in Fairbanks Alaska. Read “Removal Instructions” very carefully before placing bid. NOTE!! See New Pick Up Hours Below. NOTE!! Please Be Prepared To Load Items Yourself. Condition: Poor This lot consists of one (1) anemometer assembly. The unit has been marked as being in poor condition due to the majority of its electronic components having been removed or no longer functioning. As a result, the assembly should be considered incomplete and may require significant repair or replacement of components before it can be returned to service. The assembly is comprised primarily of two main sections. The first is a hollow metal pole that serves as the mounting base. Attached to the top of the pole is the anemometer head, which features a fin and rotating blade assembly designed to respond to wind direction and speed. The anemometer head is stamped with the manufacturer name "Young." The anemometer head is secured to the pole using hose clamps. Mounted to the pole is an additional enclosure bearing the Young branding. This enclosure houses a Young sensor identified as Model 05603. One set of wires exiting the sensor enclosure has been cut, while another wiring harness extends upward along the pole to an additional enclosure located higher on the assembly. The functionality of the remaining electronics has not been tested. Approximate Dimensions: Overall Height: ~96 inches (measured from the bottom of the pole to the highest point of the fin) Pole Diameter: ~1.25 inches Included Components: One (1) anemometer assembly Integrated metal mounting pole Anemometer head with fin and rotating cup assembly Young Model 05603 sensor enclosure Features: Metal pole construction Wind vane and rotating cup assembly Manufacturer branding: Young Young Model 05603 sensor Pole-mounted sensor enclosure Condition Summary: Marked as poor condition Majority of electronic components removed or nonfunctional Incomplete assembly One wiring harness has been cut Remaining electronics untested Shows evidence of prior use Anemometer head remains attached to the mounting pole This anemometer assembly may be suitable for parts recovery, restoration projects, educational purposes, fabrication, arts and crafts or other applications as determined by the successful bidder. Bidders are encouraged to review all photographs and verify the condition and completeness of the assembly prior to bidding.