(5) Riester Vital Sign Monitor

Full Description

Overview This lot contains (5) Riester RVS-100 vital sign monitors. Specifications Make: Riester. Model: RVS-100. Power supply: 100 - 240 V AC, 50/60 Hz. Battery: rechargeable lithium-ion, 10.8 V DC, 6600 mAh. Monitor dimensions: 303 x 230 x 110 mm (11.93 x 9.05 x 4.33 in). Monitor weight: 3600 g (7.94 lb) including temperature module and printer. Basket dimensions: 270 x 225 x 200 mm (10.63 x 8.86 x 7.87 in). Key Features Automatic oscillometric non-invasive blood pressure measurement with adult, pediatric, and neonate modes. Adult measurement ranges: SYS 30 - 270 mmHg, DIA 10 - 220 mmHg, MAP 20 - 235 mmHg. Pediatric measurement ranges: SYS 30 - 235 mmHg, DIA 10 - 220 mmHg, MAP 20 - 225 mmHg. Neonate measurement ranges: SYS 30 - 135 mmHg, DIA 10 - 110 mmHg, MAP 20 - 125 mmHg. Cuff pressure range of 0 - 280 mmHg with 1 mmHg resolution. Pressure accuracy: static plus or minus 3 mmHg, clinical plus or minus 5 mmHg with standard deviation of 8 mmHg or less. Pulse rate range of 40 - 240 bpm with 1 bpm accuracy. Initial inflation pressure: adult 160 mmHg, pediatric 130 mmHg, neonate 75 mmHg. Hardware and software double overpressure protection: adult 297 plus or minus 3 mmHg, pediatric 252 plus or minus 3 mmHg, neonate 147 plus or minus 3 mmHg. Blood pressure alarm range of 0 - 300 mmHg for SYS, DIA, and MAP. Visual alarm LEDs in yellow, red, blue, green, and orange. Audible alarm speaker with QRS tone, pitch tone, and multi-level volume of 45 dB to 85 dB measured at 1 meter. Alarm tones meet IEC 60601-1-8. Battery operating time of approximately 11 hours with SpO2, temperature, and NIBP connected in auto mode at 15 minute intervals. Full charge takes 6 hours. Low battery indicator and charging battery indicator. Ports: 1 AC power inlet, 1 RJ45 interface (100 BASE-TX, IEEE 802.3), 4 USB ports, 1 equipotential grounding point, 1 RJ11 nurse call connector, and 1 DC out port rated 15 V/1.2 A. Condition & Markings This lot is in used condition. Parts may be missing, and repairs may be required. Inspection and Removal Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment. Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description. Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance. Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchasers receipt, and a valid photo ID at the time of removal. Disclaimer The condition of the property is not warranted. Pictures are not warranted.