Caterpillar grader 14G

Full Description

NOTE!! This item is located in Fairbanks Alaska. Read “Removal Instructions” very carefully before placing bid. NOTE!! See New Pick Up Hours Below. NOTE!! Please Be Prepared To Load Items Yourself. Condition: Fair This lot consists of one (1) Caterpillar (CAT) 14G motor grader. The grader has been marked in fair condition. The unit starts and drives but requires repairs. Known repair needs, inspection observations, and identification-plate information are documented below. Prior work history is available in the document section of this listing. Condition & Operational Observations: Engine: Starts. Movement: Drives. Accumulator: Observed moving up and down. Cab blower motor: Operates; fans inside the cab run. Indicators: Operate. Wipers: Operate. Right-Side Cab Door: Does not seal completely; light is visible through a corner when closed. The door does not easily release from its locked-open position and requires some force to release. Hour Meter: Reads 17,971.5 hours. Heater: Reported functional by the prior user. During inspection, the heater did not produce warmth when tested using battery power with the engine off. Its functionality while the engine is running has not been verified. Lighting: Other lights were not tested. Side Mirrors: Damage to both side mirror trims. The observations above do not constitute a comprehensive operational or mechanical inspection. The grader requires repairs, and additional issues may be present. Known Repair Requirements: The following repairs were identified as needed: Curl cylinder bearings replacement. Line bore of the curl cylinder mounts on the circle and moldboard. Pin replacement. Moldboard curl pivot pins. Bushings and line boring. Moldboard side-shift wear pads. Lift cylinder balls on both sides of the drawbar. Identification & Specifications: Caterpillar Identification Plate (Cab Interior 1): Model: 14G PIN: 96U09117 Engine: 3306 Transmission: 2CA05503 Arrangement Numbers: 8W2516, 7W4102, 3P0301 Caterpillar Identification Plate (Cab Interior 2): Make: CAT Model: 14G Engine Model: 3306 Arrangement: 7W4102 Branch: FAI Date Marking: 11/19/9 SMR: 5 Lubricant and Coolant Information Listed on Plate: Engine: Type CD; SAE 10W-30 Transmission: Type CD/TO-2; SAE 10W Final Drives: Type CD or CD/TO-2; SAE 30W Hydraulics: Type Hydro; SAE 10W Engine Coolant: Ethyl ENT/Glycol, protection to -50°F These are transcriptions of the plate markings and are not independent recommendations for current servicing. Hydraulic Accumulator Plate: Type: 3G7397 Manufacture Date: 06-02-93 Maximum Working Pressure: 275.6 bar Test Pressure: 344.5 bar Volume: 1.9 L High-Pressure Plate: Precharge Pressure: 400 PSI (2,756 kPa) Service Pressure (Operating-Loaded): 4,000 PSI (27,560 kPa) Maximum Bursting Pressure: 20,000 PSI (137,800 kPa) Please review all photographs and the included work-history documentation carefully before bidding. The grader requires repairs, and its overall mechanical condition and suitability for service have not been independently certified.