Drone legs with wheels and accessories

Full Description

NOTE!! This item is located in Fairbanks Alaska. Read “Removal Instructions” very carefully before placing bid. NOTE!! See New Pick Up Hours Below. NOTE!! Please Be Prepared To Load Items Yourself. Condition: Fair This lot consists of three (3) drone landing gear assemblies with mounted wheels and attached components. This lot has been rated as being in fair condition due to evidence of prior use. Based on visual inspection, the assemblies show normal wear consistent with previous service, but no major defects or significant damage were observed. These components have not been functionally tested, and their operational condition cannot be guaranteed. The lot includes three (3) landing gear assemblies, each equipped with a mounted wheel and additional attached components. Each assembly retains a manufacturer identification label on the primary body of the landing gear. The labels provide the following information: Revision (REV): 0 (all three assemblies) Module Identification: Two (2) assemblies are marked "Sentry HP LH LC Gear." The remaining label is too damaged to accurately identify the module designation. Part Numbers: Two (2) assemblies: 569-504-00 One (1) assembly: 569-500 The above information has been transcribed from the visible identification labels and has not been independently verified. Each landing gear assembly is fitted with a wheel and tire. The tire sidewalls are marked as follows: Primo Spirit Size: 200 × 50 Ply Rating: 4 P.R. Maximum Inflation Pressure: 35 PSI (2.5 BAR) Additionally, each landing gear assembly includes an attached component that appears to be either an electric motor or a linear motion actuator. The exact component type has not been identified. The visible identification markings on these components include: Brand: Motion Model/Part Marking: 9234C106-R8 Number: 73683 Voltage: 21 VDC Date Marking: 07-16-03 These markings have been transcribed from the visible labels and have not been independently verified. Included Components: Three (3) drone landing gear assemblies Three (3) mounted wheels and tires Three (3) attached Motion-branded components (exact component type unverified) Features: Three complete landing gear assemblies Mounted wheels and rims Manufacturer identification labels present on all three assemblies Two assemblies identified as Sentry HP LH LC Gear Primo Spirit tires Tire size: 200 × 50 4-ply rating (4 P.R.) Maximum inflation pressure: 35 PSI (2.5 BAR) Motion-branded 21 VDC attached components Condition Summary: Rated fair condition Previously used No major defects observed during visual inspection Functional testing not performed All three assemblies retain identification labels One module label partially unreadable due to damage Attached Motion-branded components have not been identified or tested Identification information obtained from visible labels and tire markings Sold as photographed These drone landing gear assemblies may be suitable for replacement parts, restoration projects, research, or other compatible applications as determined by the successful bidder. Because the components have not been functionally tested, their operational condition cannot be guaranteed. Bidders are encouraged to review all photographs carefully and verify the quantity, condition, identification markings, compatibility, and suitability of the items for their intended use prior to placing a bid.