Multiuse workstation

Full Description

NOTE!! This item is located in Fairbanks Alaska. Read “Removal Instructions” very carefully before placing bid. NOTE!! See New Pick Up Hours Below. NOTE!! Please Be Prepared To Load Items Yourself. Condition: Fair This lot consists of one (1) multiuse workstation. This lot has been rated as being in fair condition due to showing signs of prior use and areas of rust and surface oxidation while remaining structurally sound and stable. Cosmetic wear is present throughout in the form of rust, oxidation, scratches, scuffs, and other signs consistent with prior use. No manufacturer or model information was identified on this item. Due to its unique construction, configuration, and lack of manufacturer markings, it is believed that this workstation may have been custom fabricated at the University of Alaska (UA); however, this has not been confirmed. This workstation features one (1) primary work plate and two (2) additional metal bars that may provide additional support or serve as supplemental work surfaces. The primary centered work plate measures approximately 12 inches by 12 inches and contains a centrally located circular opening. The purpose of this opening could not be confirmed during inspection. The opening measures approximately 4.5 inches in diameter and may accommodate equipment, tools, or other items during use. One of the additional bars is positioned to the left of the primary work plate. This bar measures approximately 14 inches in length by 2 inches in width. The second bar is positioned behind the primary work plate toward the rear of the unit and measures approximately 25 inches in length by 2 inches in width. Approximate Dimensions: Overall Height: Approximately 35.75 inches Overall Width: Approximately 25 inches Overall Depth: Approximately 35 inches Work Plate: Width: 12 inches Length: 12 inches Center opening diameter: Approximately 4.5 inches Additional Left-Side Bar: Length: Approximately 14 inches Width: Approximately 2 inches Additional Rear Bar: Length: Approximately 25 inches Width: Approximately 2 inches Manufacturer Information: Manufacturer: Unknown Model: Unknown Possible origin: Believed to be custom fabricated at the University of Alaska; unconfirmed Included with this Lot: One (1) multiuse workstation Features: Full metal construction One (1) primary work plate Two (2) additional metal support/work bars Approximately 4.5-inch circular opening in the primary work plate Compact workstation design Suitable for a variety of shop, maintenance, fabrication, or equipment-support applications Condition Summary: Rated in fair condition Structurally sound and stable Rust and surface oxidation present Scratches and scuffs consistent with prior use Manufacturer: Unknown Model: Unknown Appears to be custom fabricated; origin is unconfirmed Overall approximate dimensions: 35.75" H × 25" W × 35" D Sold as photographed This multiuse workstation provides a compact metal work platform with a primary 12-inch by 12-inch work plate and two additional bars that may provide supplemental support or work areas. The circular opening in the center of the primary work plate may provide additional versatility for certain applications, although its specific intended purpose could not be confirmed during inspection. Prospective bidders are encouraged to carefully review all available photographs, verify the listed dimensions and observed condition, and determine whether this workstation meets their individual needs and intended application prior to placing a bid. This item is offered for sale as-is, where-is, with no warranties or guarantees expressed or implied.