ProJet 460 plus gypsum printer with accessories and supplies

Full Description

NOTE!! This item is located in Fairbanks Alaska. Read “Removal Instructions” very carefully before placing bid. NOTE!! See New Pick Up Hours Below. NOTE!! Please Be Prepared To Load Items Yourself. Condition: Fair This lot consists of one 3D Systems Inc. ProJet 460 Plus gypsum 3D printer with a substantial collection of accessories, supplies, PPE, cleaning materials, tools, and documentation. Also included is a DualDraw LLC ZB2826 mobile air filtration unit. The printer has not been used in approximately five (5) years but was reported functional at the time of last use. Condition Summary: The lot is marked in fair condition due to prior use. The primary equipment and included accessories show minimal to no visible damage overall, although some individual components have wear or damage. The printer's current operational condition is unknown and has not been tested due to the length of time it has been out of service. One of the four resin tanks appears broken; see photographs. Primary Equipment: 3D Systems Inc. ProJet 460 Plus 3D printer. DualDraw LLC ZB2826 mobile, freestanding air filtration unit. Four (4) resin tanks; one appears broken. USB drive containing software intended for use with the printer. Preventative Maintenance Procedures packet. 3DEdit Pro 2.0 Features packet. Printing & Chemical Supplies: One (1) full and one (1) partial 3D Systems cleaning solution, P/N 360444. Three (3) full 14 kg containers of 3D Systems VisiJet PXL Core, plus one (1) partially used container, P/N 360430. Three (3) VisiJet PXL Clear 1L containers, plus one (1) installed in the printer, P/N 360434. Two (2) 3D Systems StrengthMax High Strength Epoxy Infiltrant, P/N 360458; one full and one partially used. One (1) unused and one (1) partially used StrengthMax Hardener, P/N 360460. One (1) partial MG Chemicals Super Contact Cleaner. Seven (7) unused HP 11 InkJet cartridges. Three (3) unused HP InkJet 57 tricolor cartridges. One (1) roll of material appearing similar to parchment paper. PPE & Cleaning Supplies: One (1) partially used box of HDX disposable nitrile gloves, originally 50; remaining quantity unknown. Mapa AdvanTech TRLILES 994 gloves, originally 100 pairs; remaining quantity unknown. One (1) unopened Cozy Home Living black vinyl apron. Fourteen (14) 3M face masks. Two (2) pairs safety goggles. One (1) box of Q-Tips, originally 500; remaining quantity unknown. Five (5) individual cotton swabs. Five (5) cleaning brushes. Two (2) hose attachments for cleaning. One (1) 25 mL syringe. Tools & Accessories: One (1) 3D-printed scooper. Three (3) plastic cafeteria-style trays, each approximately 16.25" W x 12" D x 0.75" H. One (1) freestanding device with attached magnifying glass and two forceps ends. Twenty-nine (29) unidentified brushes. One (1) 36-pack of HFT Acid Shop Brushes, Item 61880. One (1) holding tray with holes arranged in an 8 x 6 grid. One (1) hand pump appearing to contain lubricant or oil. Five (5) sheets of 3M 220 Very Fine Sandblaster Pro sandpaper. Four (4) squeeze-bottle tops. One (1) Allen wrench, one (1) Phillips screwdriver, one (1) metal pick, and one (1) putty knife. Three (3) unidentified pieces. The four resin tanks, accessories, supplies, PPE, tools, software USB drive, and documentation are included with the primary equipment as part of this single lot. Quantities identified as unknown or approximate have not been independently inventoried. Given the age of the equipment and approximately five years since reported last use, bidders should review all photographs carefully and inspect the equipment and included materials prior to bidding. Buyers should independently verify the suitability, condition, shelf life, and compatibility of included consumables before use.