T.I.P Model 99-S Pressurized Sandblaster

Full Description

This is a listing for a T.I.P Model 99-S Pressurized Sandblaster. Unit is in used cosmetic condition. Unit was removed from working environment. Sold as is. Specs: Core Operational Specs- • Abrasive Capacity: 85–100 lbs of blasting media (depending on weight/density of the grit). • System Type: Direct Pressure-Fed / Pressure Pot (unlike slower siphon-fed blasters, the tank itself gets pressurized to push the media out at much higher speeds). • Tank Physical Dimensions: 10" Diameter × 25" Height (Standard tank body). • Total Unit Footprint: 15.5" Width × 34.25" Height × 17.0" Depth. • Dry Weight: Approximately 55–60 lbs empty. Pneumatic (Air Compressor) Requirements- Because this is a high-volume vintage pressure pot, a standard small "pancake" compressor will not keep up. • Operating Pressure: Recommended between 60 to 125 PSI max. (The built-in safety relief valve pops if it climbs too high). • Air Volume Consumption: Ideally 7 to 15 CFM (Cubic Feet per Minute) depending entirely on the nozzle orifice size you put into your squeeze gun. • Air Inlet Connection: 1/4" NPT male/female quick connector thread. Hardware Design Features- • Mobility: Mounted on a rolling frame with two 8" tires/wheels and a steel front support leg. • Top Design: Built with an inverted cone top design making it a built-in funnel for pouring media straight down into the pot. • Closure Valve: Semi-automatic 3" pull-up sealing pop-up ball valve that seals the top under air pressure. • Valving: Lower manifold features a primary Air Inlet Valve, a bottom Abrasive/Media Metering Valve, and a Choke Valve to force blockages out of the hose. • Hose / Nozzle: Originally shipped out of Canfield, OH with a 10-foot long 1/2" ID abrasive hose paired to a manual squeeze/squeezer blast gun nozzle. LxWxH: 20" x 23" x 40" Weight: 81lbs Unit sold as pictured above. ***For assistance with shipping or scheduling in person and 3rd party appointments please email Rachel Kessler at rkessler@tryc2.com. You are required to contact us to make your arrangements for removal within 10 business days of the auction's end or your lot will be defaulted.*** R2 CODES: C4 USED GOOD F4 HARDWARE FUNCTIONAL NON-DATA BEARING